Dec 132012
 

Another fabulous tutorial offered by Barrie Edwards – perfect to go along with this weeks giveaway…..
                                   
A tutorial on soldering!
                                                 
Barrie is an extremely talented jewelry artist – you can see her jewelry here:
Windermere Designs
                                                        
And if that weren’t enough – Barrie is THE force behind the

Frazer Valley Bead Show

                                                               
The Fraser Valley Bead and Jewelry Show is Western Canada’s Premier Bead and Jewelry Extravaganza, with nearly 50 artists and vendors gather from all over North America to offer the perfect shopping experience for the bead and jewelry fanatic!
                                                                             
You can view the tutorial below or you can click the little arrow in the upper right corner to open the document itself.

                                                                             
Thanks Barrie!!!!!!!!!!!!

                                                                             

If you are having trouble viewing the document, you may find it here

                                                                             

Share

Comments

comments

 Posted by at 12:01 am

  9 Responses to “Day 13 – Tutorial”

  1. Great tute – and tip using the water!

  2. well, after reading the tute again, I am confused about where you put the water droplet? on the tabletop beside the firebrick, not on the firebrick? how does that water help with the solder? do you dip the solder into the water?

    Again, thanks for the tute!

  3. Thank you so much for the tutorial, Barrie! This is a great gift!!!! ♥♥♥

  4. Is anyone else not seeing it? all I have is a large gray spot on the screen where the tutorial should be. I have tried in several browsers now. 🙁

  5. As always Barrie, you are a fabulous and generous teacher. Thanks for the tut!!!!

  6. Linda, the water drop goes on the table beside the fire brick. You dip the piece of solder in the water drop then put it on the hot piece where you want the solder to go. The little bit if water on the solder holds the piece of solder exactly where you put it (friction?). If you don’t use water, the solder might slide all over the place. It’s just a little cheat I use to hold solder in place when I’m soldering.