Spin Ring Tutorial



Spin Ring – Jewelry Tutorial

Jewelry Tutorial - Spin Ring

In this jewelry tutorial Cristine will give you step by step instructions how to make this spin ring. Spin rings are also known as spinner rings, worry rings, or fidget rings, they have two pieces to them, a wide band that fits on your finger and a smaller band that fits on the wide band but moves independently, it is kept on the wide band by flaring out the edges.

Using a torch from the hardware store and a few other tools, she will talk to you about different materials you can use, options in finishing, texturing and polishing. She also provides a chart that will show you how to determine the amount of material you will need to achieve a certain size ring. The chart shows North American, European and UK sizes with measurements in millimetres and inches.

18 or 20 gauge sterling silver sheet
12 gauge half round sterling silver wire
Medium solder

Jewellers saw
Sheers (optional)
Nylon jaw or ring bending pliers
Ring mandrel
Pickling solution
Soldering surface
Rawhide mallet
Dapping set
Chasing hammer
Tumbler (optional)
Steel block (optional)
Hammer of your choice for texturing (optional)

PLEASE NOTE, our automated system is experiencing technical difficulties – due to this, if you do not receive the automated link to the tutorial, you can expect an email with the tutorial attached within 24 hours of payment.



 Posted by at 10:42 pm

  2 Responses to “Spin Ring Tutorial”

  1. I have wanted to make these rings for a long time but could not find a tutorial that gave me step by step directions.

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>